Thank you for choosing PurchasingEfficiency.com to source Part Number JTE60248 with an NSN 3130-01-600-0428. Purchasing Efficiency is a leading website for purchasing long lead-time, hard to find, and obsolete parts, as well as new and used parts.
Please complete the RFQ form for part number JTE60248 with 54547 and a dedicated product expert will be in touch with you within 15 minutes to discuss your quote for part number JTE60248, NSN 3130-01-600-0428, and manufactured by Rotating Precision Mechanisms Inc.
We stock more than 25 million parts from 5,100+ recognized manufacturers. All orders are supplied through California, comprising of a comprehensive product inventory. For any additional queries, you can contact us 24/7 on our toll-free number: +1-714-705-4780 or e-mail us at sales@purchasingefficiency.com
MRC | Criteria | Characteristic |
---|---|---|
AGKL | Lubrication Fitting Type | FLUSH |
SFTT | Surface Treatment | CHROMIUM RACE |
MATT | Material | RUBBER SYNTHETIC SEAL |
MATT | Material | STEEL COMP E52100 BALL |
AGAV | End Item Identification | ELECTRONIC WARFARE EQUIPMENT, NONAIRBORNE |
MDCL | Material Document And Classification | AVON SPEC NUMBER BES 2-1-054, AISI 1552 MFR REF SINGLE MATERIAL RESPONSE RACE |
LMDC | Lubrication Material Document And Classification | MIL-C-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
CXCY | Part Name Assigned By Controlling Agency | BEARING ASSY |
MDCL | Material Document And Classification | AISI S2100 ASSN STD SINGLE MATERIAL RESPONSE BALL |
LBMA | Lubrication Material | GREASE |
FEAT | Special Features | OUTSIDE DIA 26.125; CONTAINS 64 (.75 DIA) BALLS; TWO 1/8-27 NPT GREASE FITTINGS ARE LOCATED 180 DEG APART (RECEASED BELOW OD) TO INTERSECT WITH THE VERTICAL 1/8-27 NPT LUBE HOLES; HARDNESS RATING OF RACES 24-32 RC, BALLS 63-66RC, RACEWAY INDUCTION 58-63RC; HAS INV STUB TOOTH FORM, PITCH DIA 19, DIAMETRAL PITCH 8, PRESSURE ANAGLE 20 DEG, 152 TEETH, HARDNESS 24-32RC, CIRCULAR TOOTH THICKNESS 0.1963-0.1948; EACH RACE IS 2.0 INC HIGH, THEY DON'T ALIGN LEVEL, ENTIRE ASSEMBLY IS 2.50 HIGH |
MATT | Material | STEEL RACE |
CWGR | Lubrication Fitting Angle From Horizontal Centerline | 0.0 DEGREES NOMINAL |
ABXV | Bore Diameter | 18.850 INCHES MINIMUM AND 18.856 INCHES MAXIMUM |
MRC | Decoded Requirement | Clear Text Reply |
Quotes within 15 minutes |
|
Competitive Prices |
|
Dedicated and Knowledgeable |
|
AOG Services 24/7 x 365 |
|
Same-day |
If You’d Like to Stay Up to Date On the Newest Parts That We offer, Kindly Go Through Our Aircraft Parts Catalog.
Request for Quote