Instant RFQ

Get a Competitive Quote for Part PLT1099-6-11 by Monogram Aerospace Fasteners Inc (NSN 5320-01-416-5185)

Part Number:  PLT1099-6-11
Alternate P/N:  PLT1099611
NIIN:  14165185
Item Name :  rivet blind
CAGE Code:  98524
FSC:  5320 Rivets
FSG:  53 Hardware and Abrasives
INC Code:  00864
Country:  USA
NCB Code:  01

Thank you for choosing PurchasingEfficiency.com to source Part Number PLT1099-6-11 with an NSN 5320-01-416-5185. Purchasing Efficiency is a leading website for purchasing long lead-time, hard to find, and obsolete parts, as well as new and used parts.

Please complete the RFQ form for part number PLT1099-6-11 with 98524 and a dedicated product expert will be in touch with you within 15 minutes to discuss your quote for part number PLT1099-6-11, NSN 5320-01-416-5185, and manufactured by Monogram Aerospace Fasteners Inc.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PLT1099-6-11

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without Aircraft Model 6RE77 is void.

We stock more than 25 million parts from 5,100+ recognized manufacturers. All orders are supplied through California, comprising of a comprehensive product inventory. For any additional queries, you can contact us 24/7 on our toll-free number: +1-714-705-4780 or e-mail us at sales@purchasingefficiency.com

NSN Information for Part Number PLT1099-6-11 with NSN 5320-01-416-5185, 5320014165185

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5320-01-416-5185

Item Description:

Rivetblind

53200141651850N
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
Plt1099-6-11525

Characteristics Data of NSN 5320-01-416-5185, 5320014165185

MRCCriteriaCharacteristic
MATTMaterialSTEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE
ABAFExpansion DeviceTHREADED SLEEVE
MATTMaterialSTEEL COMP 4130 NUT OR STEEL COMP 4140 NUT OR STEEL COMP 8740 NUT
AASKHead StyleFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
SFTTSurface TreatmentCADMIUM SLEEVE
SFTTSurface TreatmentCADMIUM BOLT
AAZFShank StyleTHREADED SELF-PLUGGING SHANK W/SLEEVE
CRSQCountersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
SFTTSurface TreatmentCADMIUM NUT
CQFMHardness Rating39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT
AGAVEnd Item IdentificationT-38A ACFT
FEATSpecial FeaturesORIGINAL NAME: FASTENER
MDCLMaterial Document And ClassificationIL-S-6758 FED SPEC 10TH MATERIAL RESPONSE BOLT OR IL-S-5626 FED STD 10TH MATERIAL RESPONSE BOLT OR IL-S-6049 MIL SPEC 10TH MATERIAL RESPONSE BOLT
ANEEGrip Length0.657 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
AAZGHead Major Diameter0.342 INCHES NOMINAL
STDCSurface Treatment Document And ClassificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT
STDCSurface Treatment Document And ClassificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
STDCSurface Treatment Document And ClassificationQQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE
AAZEShank Diameter0.2290 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM
CQFMHardness Rating39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT
MATTMaterialSTEEL COMP 4130 BOLT OR STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT
MRCDecoded RequirementClear Text Reply
ABAJLubricationWAX OR CETYL ALCOHOL OR SOLID FILM

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting Purchasing Efficiency Today.

If You’d Like to Stay Up to Date On the Newest Parts That We offer, Kindly Go Through Our Aircraft Parts Catalog.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top