Instant RFQ

Get a Competitive Quote for Part 721G1 by Linde Material Handling South East Ltd (NSN 2920-00-936-8247)

Part Number:  721G1
NIIN:  9368247
Item Name :  generator engine ac
CAGE Code:  556A6
FSG:  29 Engine Accessories
INC Code:  17311
Country:  USA
NCB Code:  00

Thank you for choosing PurchasingEfficiency.com to source Part Number 721G1 with an NSN 2920-00-936-8247. Purchasing Efficiency is a leading website for purchasing long lead-time, hard to find, and obsolete parts, as well as new and used parts.

Please complete the RFQ form for part number 721G1 with 556A6 and a dedicated product expert will be in touch with you within 15 minutes to discuss your quote for part number 721G1, NSN 2920-00-936-8247, and manufactured by Linde Material Handling South East Ltd.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 721G1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without Aircraft Model 6RE77 is void.

We stock more than 25 million parts from 5,100+ recognized manufacturers. All orders are supplied through California, comprising of a comprehensive product inventory. For any additional queries, you can contact us 24/7 on our toll-free number: +1-714-705-4780 or e-mail us at sales@purchasingefficiency.com

NSN Information for Part Number 721G1 with NSN 2920-00-936-8247, 2920009368247

NSNFSCNIINCLSHazmatDEMILCancelled NSN
2920-00-936-8247

Item Description:

Generatorengine Accessory

29200093682470N 2920007931032
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
721g1225

Characteristics Data of NSN 2920-00-936-8247, 2920009368247

MRCCriteriaCharacteristic
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0 375 INCHES NOMINAL
ABFFFURNISHED ITEMSLOCKWASHER AND NUT AND WOODRUFF KEY
ABPTSECOND STEP DIAMETER0 6684 INCHES MINIMUM AND 0 669 INCHES MAXIMUM
ABRRKEYWAY WIDTH0 125 INCHES NOMINAL
ABVAUNTHREADED PORTION LENGTH0 710 INCHES NOMINAL
ACJCMOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
ADERMOUNTING STYLEBRACKET MTD WTHREE MTG HOLES TOP HOLE THREADED
AFYSKEYWAY LENGTH0 625 INCHES NOMINAL
AHZVSUBMERSIBILITYNONSUBMERSIBLE
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE
ANTXDISTANCE FROM END TO KEYWAY CENTER0 766 INCHES NOMINAL
AWDPTHREAD DIAMETER0 669 INCHES NOMINAL
AXHXGROUND POLARITY TYPENEGATIVE
BCGDARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT2500
BCGFMAXIMUM OUTPUT CURRENT RATING IN AMPS25 0
BCGGMINIMUM CURRENT CUT-IN SPEED IN RPM1100
BCGNGROUNDING METHODINTERNAL
BCGSSHAFT DRIVE END STYLESTRAIGHT SHAFT END THREADED WKEYWAY
BCLYDISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3 380 INCHES NOMINAL
BCLZDISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3 190 INCHES NOMINAL
BCMBANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG180 0
BCMCANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG163 0
BCMDDISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET6 118 INCHES MINIMUM AND 6 131 INCHES MAXIMUM
BCMFDISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET6 998 INCHES MINIMUM AND 7 011 INCHES MAXIMUM
BCMHBOTTOM MOUNTING HOLE DIAMETER0 323 INCHES MINIMUM AND 0 333 INCHES MAXIMUM
BCNDMAXIMUM RATED ARMATURE SPEED IN RPM8000
BZRRTHREAD SERIESUNS
CFHLTHREAD CLASS2A
CMLKMOUNTING HOLE THREAD SERIES DESIGNATORUNC
CMLLMOUNTING HOLE THREAD DIAMETER1 312 INCHES NOMINAL
CMLMMOUNTING HOLE THREAD QUANTITY PER INCH18
CMLNMOUNTING HOLE THREAD CLASS2B
CMLPTHREAD QUANTITY PER INCH20
ELECVOLTAGE IN VOLTS12 0
ZZZVFSC APPLICATION DATAENGINE ELECTRICAL SYSTEMNONAIRCRAFT

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting Purchasing Efficiency Today.

If You’d Like to Stay Up to Date On the Newest Parts That We offer, Kindly Go Through Our Aircraft Parts Catalog.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top