Instant RFQ

Get a Competitive Quote for Part 9M702-2B10 by Boeing Company (NSN 5340-01-501-9129)

Part Number:  9M702-2B10
Alternate P/N:  9M7022B10
Manufacturer:  boeing company
NIIN:  15019129
Item Name :  clamp block section
CAGE Code:  76301
FSG:  53 Hardware and Abrasives
INC Code:  39404
Country:  USA
NCB Code:  01

Thank you for choosing PurchasingEfficiency.com to source Part Number 9M702-2B10 with an NSN 5340-01-501-9129. Purchasing Efficiency is a leading website for purchasing long lead-time, hard to find, and obsolete parts, as well as new and used parts.

Please complete the RFQ form for part number 9M702-2B10 with 76301 and a dedicated product expert will be in touch with you within 15 minutes to discuss your quote for part number 9M702-2B10, NSN 5340-01-501-9129, and manufactured by Boeing Company.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 9M702-2B10

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without Aircraft Model 6RE77 is void.

We stock more than 25 million parts from 5,100+ recognized manufacturers. All orders are supplied through California, comprising of a comprehensive product inventory. For any additional queries, you can contact us 24/7 on our toll-free number: +1-714-705-4780 or e-mail us at sales@purchasingefficiency.com

NSN Information for Part Number 9M702-2B10 with NSN 5340-01-501-9129, 5340015019129

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-01-501-9129

Item Description:

Clampblocksection

53400150191290P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
9m702-2b10523

Characteristics Data of NSN 5340-01-501-9129, 5340015019129

MRCCriteriaCharacteristic
STYLStyle DesignatorRECTANGULAR
CWWMClamping Hole Diameter0.258 INCHES MINIMUM FIRST HOLE AND 0.274 INCHES MAXIMUM FIRST HOLE
CWXCDistance From End To First Mounting Hole Center0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM
CWXZCenter To Center Distance Between First And Second Clamping Holes0.614 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
CWWMClamping Hole Diameter0.382 INCHES MINIMUM SECOND HOLE AND 0.398 INCHES MAXIMUM SECOND HOLE
CWWMClamping Hole Diameter0.382 INCHES MINIMUM THIRD HOLE AND 0.398 INCHES MAXIMUM THIRD HOLE
CWYCCenter To Center Distance Between First And Third Clamping Holes1.301 INCHES MINIMUM AND 1.321 INCHES MAXIMUM
MATTMaterialPLASTIC
ABMKOverall Width0.384 INCHES MINIMUM AND 0.404 INCHES MAXIMUM
ABHPOverall Length1.864 INCHES MINIMUM AND 1.884 INCHES MAXIMUM
AXPCCenter To Center Distance Between First And Second Mounting Holes0.614 INCHES MINIMUM AND 0.634 INCHES MAXIMUM
ABTBMounting Hole Diameter0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
ABTJMounting Hole Quantity2
AFECDistance From Center Of Mounting Hole To Edge Along The Width0.197 INCHES NOMINAL
BYGGBlock Height0.384 INCHES MINIMUM AND 0.404 INCHES MAXIMUM
CWTDClamping Hole Quantity3
CWXNDistance From End To First Clamping Hole Center0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
AZGMMounting FacilityUNTHREADED HOLE
MRCDecoded RequirementClear Text Reply

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting Purchasing Efficiency Today.

If You’d Like to Stay Up to Date On the Newest Parts That We offer, Kindly Go Through Our Aircraft Parts Catalog.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top