Instant RFQ

Get a Competitive Quote for Part 0E1629 by Allis Chalmers Corp (NSN 2920-00-294-3479)

Part Number:  0E1629
Manufacturer:  allis chalmers corp
NIIN:  2943479
Item Name :  generator engine ac
CAGE Code:  92392
FSG:  29 Engine Accessories
INC Code:  17311
Country:  USA
NCB Code:  00

Thank you for choosing PurchasingEfficiency.com to source Part Number 0E1629 with an NSN 2920-00-294-3479. Purchasing Efficiency is a leading website for purchasing long lead-time, hard to find, and obsolete parts, as well as new and used parts.

Please complete the RFQ form for part number 0E1629 with 92392 and a dedicated product expert will be in touch with you within 15 minutes to discuss your quote for part number 0E1629, NSN 2920-00-294-3479, and manufactured by Allis Chalmers Corp.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 0E1629

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without Aircraft Model 6RE77 is void.

We stock more than 25 million parts from 5,100+ recognized manufacturers. All orders are supplied through California, comprising of a comprehensive product inventory. For any additional queries, you can contact us 24/7 on our toll-free number: +1-714-705-4780 or e-mail us at sales@purchasingefficiency.com

NSN Information for Part Number 0E1629 with NSN 2920-00-294-3479, 2920002943479

NSNFSCNIINCLSHazmatDEMILCancelled NSN
2920-00-294-3479

Item Description:

Generatorengine Accessory

2920002943479 N
CIICHCCESDPMICCriticalityENAC
A
Part NumberISCRNVCRNCCHCCMSDSSADC
0e1629295

Characteristics Data of NSN 2920-00-294-3479, 2920002943479

MRCCriteriaCharacteristic
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0 906 INCHES NOMINAL
AAUJSPLINE MAJOR DIAMETER0 874 INCHES NOMINAL
AAUKSPLINE WIDTH0 216 INCHES MINIMUM AND 0 217 INCHES MAXIMUM
ABSASPLINE QUANTITY6
ACJCMOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
ADERMOUNTING STYLEBRACKET MTD WTHREE MTG HOLES TOP HOLE THREADED
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT
AHZVSUBMERSIBILITYNONSUBMERSIBLE
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE
AWDPTHREAD DIAMETER0 625 INCHES NOMINAL
AXFHSPLINE LENGTH1 938 INCHES NOMINAL
BCGDARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT1500
BCGFMAXIMUM OUTPUT CURRENT RATING IN AMPS26 0
BCGGMINIMUM CURRENT CUT-IN SPEED IN RPM880
BCGNGROUNDING METHODINTERNAL
BCGSSHAFT DRIVE END STYLESPLINED SHAFT END THREADED
BCGTCOTTER PIN HOLEINCLUDED
BCLYDISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3 875 INCHES NOMINAL
BCLZDISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3 500 INCHES NOMINAL
BCMBANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG8 0
BCMCANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG201 0
BCMDDISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET7 243 INCHES MINIMUM AND 7 257 INCHES MAXIMUM
BCMFDISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET8 181 INCHES MINIMUM AND 8 195 INCHES MAXIMUM
BCMHBOTTOM MOUNTING HOLE DIAMETER0 328 INCHES MINIMUM AND 0 453 INCHES MAXIMUM
BCNDMAXIMUM RATED ARMATURE SPEED IN RPM1800
BZRRTHREAD SERIESUNF
CFHLTHREAD CLASS2A
CMLKMOUNTING HOLE THREAD SERIES DESIGNATORUNC
CMLLMOUNTING HOLE THREAD DIAMETER0 438 INCHES NOMINAL
CMLMMOUNTING HOLE THREAD QUANTITY PER INCH14
CMLNMOUNTING HOLE THREAD CLASS2B
CMLPTHREAD QUANTITY PER INCH18
ELECVOLTAGE IN VOLTS12 0

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting Purchasing Efficiency Today.

If You’d Like to Stay Up to Date On the Newest Parts That We offer, Kindly Go Through Our Aircraft Parts Catalog.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top