Instant RFQ

Get a Competitive Quote for Part HR 1 1 2 XC CCP 43 by Accurate Bushing Company (NSN 3110-01-286-6144)

Part Number:  HR 1 1 2 XC CCP 43
Manufacturer:  accurate bushing company
NIIN:  12866144
Item Name :  cam follower needle
CAGE Code:  07484
FSG:  31 Bearings
INC Code:  00040
Country:  USA
NCB Code:  01

Thank you for choosing PurchasingEfficiency.com to source Part Number HR 1 1 2 XC CCP 43 with an NSN 3110-01-286-6144. Purchasing Efficiency is a leading website for purchasing long lead-time, hard to find, and obsolete parts, as well as new and used parts.

Please complete the RFQ form for part number HR 1 1 2 XC CCP 43 with 07484 and a dedicated product expert will be in touch with you within 15 minutes to discuss your quote for part number HR 1 1 2 XC CCP 43, NSN 3110-01-286-6144, and manufactured by Accurate Bushing Company.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HR 1 1 2 XC CCP 43

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without Aircraft Model 6RE77 is void.

We stock more than 25 million parts from 5,100+ recognized manufacturers. All orders are supplied through California, comprising of a comprehensive product inventory. For any additional queries, you can contact us 24/7 on our toll-free number: +1-714-705-4780 or e-mail us at sales@purchasingefficiency.com

NSN Information for Part Number HR 1 1 2 XC CCP 43 with NSN 3110-01-286-6144, 3110012866144

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3110-01-286-6144

Item Description:

Cam Followerneedle Bearing

31100128661440N
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
4m340-150525

Characteristics Data of NSN 3110-01-286-6144, 3110012866144

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0 7500 INCHES NOMINAL
ABHPOVERALL LENGTH2 4060 INCHES NOMINAL
ADGAOVERALL OUTSIDE DIAMETER1 4990 INCHES MINIMUM AND 1 5000 INCHES MAXIMUM
AGRJSTUD DIAMETER0 8750 INCHES MINIMUM AND 0 8760 INCHES MAXIMUM
AGVTOUTER RING WIDTH0 8700 INCHES MINIMUM AND 0 8750 INCHES MAXIMUM
AGXFSTUD LENGTH1 5000 INCHES NOMINAL
AGYJSEAL QUANTITY2
AGYWBEARING SEAL TYPECONTACT
CBBLFEATURES PROVIDEDLUBRICATION HOLE
CMLPTHREAD QUANTITY PER INCH14
CQJXNOMINAL THREAD SIZE0 875 INCHES
CTFZSTANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING
FEATSPECIAL FEATURES80 PCT FULL OF SPECIFIED LUBRICANT PLUG TO BE SUPPLIED TO CLOSE OFF UNUSED LUBE HOLE IN END OF SHANK CROWNED OD
LBMALUBRICATION MATERIALGREASE
LMDCLUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATTMATERIALPLASTIC ACETAL OR PLASTIC POLYAMIDE SEAL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONL-P-392 FED SPEC 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 2ND MATERIAL RESPONSE SEAL
SFTTSURFACE TREATMENTCADMIUM OUTER RING
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-C-320CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER
STYLSTYLE DESIGNATORCAM FOLLOWER
THSDTHREAD SERIES DESIGNATORUNF
ZZZKSPECIFICATIONSTANDARD DATA76301-4-340 MANUFACTURERS STANDARD

ASAP Semiconductor’s Certifications and Memberships


Thank You for Visiting Purchasing Efficiency Today.

If You’d Like to Stay Up to Date On the Newest Parts That We offer, Kindly Go Through Our Aircraft Parts Catalog.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top